3d Printing Design For Piggy Bank Plug

Troll Piggy Bank Plug

thingiverse

A simple plug for a vintage Troll piggy bank.

Customizable Piggy Bank plug

thingiverse

I needed a piggy bank plug for a piggy bank that was missing it's plug. I tried printing one I found, link below, but it was too small. https://www.thingiverse.com/thing:2470054 Redesigned in OpenScad to be customizable and to fit my needs,...

Piggy Bank Plug

thingiverse

A simple plug for Piggy Banks. It is set for roughly a 1" hole. It can be re-sized in most printer operating software. ...I designed it with http://www.123dapp.com/design.

Piggy Bank Plug

thingiverse

Needed a replacment plug for a piggy bank. ... This is approx 40mm in diameter and the flange adds 4mm so size 4mm smaller than you need in MakerWare or whatever.

piggy bank plug

youmagine

This is a Piggy bank plug that can be easily printed with PLA. Slide it in and move the lock to lock it in position. the hole in the piggy bank must be between 29mm and 32mm. or you must change the design using fusion 360 for example. ... 01 with...

Gawdy piggy bank plug

thingiverse

To make matters worse, the original 29.5mm diameter plug is also missing! Well, fret no more! Here's a plug that replaces it. If you found this useful, it would bring me great joy to see your work - so be sure to share. :) Or, better yet,...

Piggy Bank Plug - Sparscheinstopfen (TPU)

thingiverse

Replacement for Piggy Bank Plug. ...

Piggy Bank Plug - Sparschwein Stopfen

thingiverse

as a spare part for your piggy bank (in my case). Use as it is, or as an inspiration for your own design (Remix). Sliders retractable by clamping with finger nails. minimum hole diameter: 32mm wall thickness (around hole): 5mm housind diameter: 43mm...

Replacement moneybox piggy bank plug/stopper

thingiverse

Replacement moneybox piggy bank plug/stopper. This was for my son's sugar skull piggy bank. The stopper broke. ...The hole size is 31.5mm.

Gingotts Piggy Bank with plug seperated

thingiverse

Used Meshmixer to remove the plug from the bank and save it as it's own stl. Then saved plug as it's own stl. ...

Piggy Bank Plug - Sparschwein Deckel - Deckel Spardose

thingiverse

Simple plug for piggy banks. Disigned for holes with dimensions 32 mm x 4 mm. Feel free to scale the the x axis, the y axis and / or the z axis to fit your needs. German: Einfacher Stoepsel fuer Sparschweine. Passt auf Loecher mit den...

Piggy bank plug (also: generic hole cover)

thingiverse

Made this to replace a missing stopper on a piggy bank bought from Target. ... The SCAD file is pretty adjustable but you might have to mess with the translation of the parts if you need to change the diameter.

Piggy Bank Plug with Coin Slot

thingiverse

Stop print or cut top off of http://www.thingiverse.com/thing:121215 and use this as a plug - print with pliable material. ... Added V2 that will reduce material and print time STILL not print tested yet.

piggy bank - piggy bank

cults3d

I drew an original piggy bank of cartoon shape I drew an original piggy bank of cartoon shape

piggy bank - piggy bank

cults3d

I drew an original piggy bank of cartoon shape I designed an original cartoon-shaped piggy bank...

Piggy Bank Plug 3

thingiverse

Customized version of http://www.thingiverse.com/thing:1943463 Created with Customizer! ...http://www.thingiverse.com/apps/customizer/run?thing_id=1943463

Piggy Bank